End Yokes
Filters: BRAND = Neapco, THRU HOLE = 1.500, | PART NUMBER | SERIES | SPLINE COUNT | SPLINE DIA. | HUB DIA. | THRU HOLE | C/L TO END | STYLE | DIFF MODEL | NOTES | VEHICLE CLASS | BRAND |
|---|---|---|---|---|---|---|---|---|---|---|---|
N2-4-4061X |
1310 | 10 | 1.125 | 1.552 | 1.500 | 3.000 | CV | Common TC yoke for early 10 spline applications. Counterbore 0.311", Slinger 330699 | LD | Neapco | |
| N2-4-2791 |
1310 | 10 | 1.125 | 1.552 | 1.500 | 3.000 | UB | LD | Neapco | ||
| NOE-04-6032-A |
1000 | 22 | 0.984 | 1.500 | 1.500 | 4.000 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): 1.57 PIN HOLE SIZE (in): .232-.238 |
LD | Neapco | |
| N2-4-JK02 |
1310 | 24 | 1.250 | 1.876 | 1.500 | 3.000 | UB | Used at differential end on 07+ Jeep JK. | LD | Neapco | |
| N3-4-JK04 |
1350 | 24 | 1.250 | 1.876 | 1.500 | 3.000 | UB | Used at differential end on 07+ Jeep JK. | LD | Neapco | |
| N2-4-JK06 |
1310 | 24 | 1.250 | 1.850 | 1.500 | 3.000 | UB | Jeep JK Conversion - Pinion Front | LD | Neapco | |
| N3-4-JK08 |
1350 | 24 | 1.250 | 1.850 | 1.500 | 3.100 | UB | Dana 30 | Front has 1.850 seal surface | LD | Neapco |
